Products >> Hydrology and Water Conservancy >>
Deep Well Water Level Meter
- Product No.：WLM1000
Customized support: OEM, ODM
Range: 50M, 100M, 150M, 200M, 300M,400M,500M (optional)
Probe diameter: 14mm
Minimum indication: 1mm
Repeat indication: ±2.0mm
Sensor Material: stainless steel
Application: borehole, pipe, well depth water level measurement
Alarm: sound alarm with light indicator
1. Quick response circuit design, high detect speed, high sensitivity
2. Adapt to various environmental and regional water quality
3. Low power consumption, battery-powered use two years at once
4. The cable has a ruler scale to measure the water level directly
Shell color: orange, blue, yellow, white
Measurement range: 30m,50m,100m,150m ,200m,300m,400m,500m
Battery power: 9V lithium battery
Instrument for temperature: -20℃~+60℃
The response time for output：≤1ms
Adaptation range of water quality：10μω~1000μω
Measurement signal：LED, buzzer, electricity meter
Insulation resistance: >200MΩ×km
Flame retardant: IEC60332-1
temperature range: -40℃~+90℃
Dam power station
Underground well water etc.
Wells, boreholes, standpipes, and tanks
Uses and characteristics
Our Cable Water Level Gauge provided the most accurate method of measuring the water level,
typically used for measuring wells, drilling and pipe’s water level. The instrument can be used in during construction, can also be used as a long-term safety monitoring of the project.
The instrument consists of a sensor probe, a host, and a reel.
Easy to use
1, Slowly slide the sensor probe head down into the water.
2, When the probe head touches the water, an induced potential is generated.
3, After circuit processing, sound and light instructions are issued.4, Then read out the height difference data between the surface and the ground from the ruler.